-40%
AMACO- Lot of Chris Lyne, Daniel John, Hands & Feet Push Molds-Rare-OOP
$ 9.76
- Description
- Size Guide
Description
AMACO - Combo - Lot ofChris Lyne
,
Daniel John
,
Hands
&
Feet
Push Molds-Rare-Out Of Production - All 4 - Circa 1993
- A DollMaker's Dream!!!
Amaco No.7 "Chris Lyne" Woman's Push Mold
by Designer Maureen Carlson -"What a Character" series, Rare & OOP*
What you see is a push mold with a very quick (5 minute) placement of raw polymer clay in mold and taken out for the purpose of taking the picture. The woman's mold is smaller than the man's mold and also has a neck as part of the mold.
-I used 2 types of clay,
Sculpey
original (white) which is very soft and therefore removing it from the mold caused some distortions and you may also see fingernail marks because it was done so quickly. The other clay (green) is
Fimo
and it is a harder, denser clay and therefore is easier to mold and remove. Neither clays have been trimmed down or baked and were just placed in my personal mold for illustration purposes.
The mold is a push mold and is very sturdy. The features as very clear when you put the clay in and carefully mold the face.
The
mold
is approximately
1
¾"x
1
¾"
, the
face
after molding is about
1" high x ¾ wide"
.
AMACO - No. 9
"Daniel John"
by Designer Maureen Carlson – “What a Character”- RARE & Out Of Production – Circa 1993
This is a push mold with a very quick (5 minute) placement of raw polymer clay in mold and taken out for the purpose of taking the picture. I used 2 types of clay,
Sculpey
original (white) which is very soft and therefore removing it from the mold caused some distortions and you may also see fingernail marks because it was done so quickly. The other clay (green) is
Fimo
and it is a harder, denser clay and therefore is easier to mold and remove. Neither clays have been baked and were just placed in my personal mold for illustration purposes.
The mold is a push mold and is very sturdy. The features as very clear when you put the clay in and carefully mold the face.
The mold is approximately 1
¾" x 2", the face after molding is about 1" x 1½".
The push mold that is being sold has not been used. It is Brand New-Never Used.
Medium to Large Hands Push Mold - Designer Maureen Carlson - 1993- Rare & OOP*
The mold measures
3¼”
at the largest point (side to side), top to bottom
1¾”
.
The width (thickness) of the actual mold is
¾”.
The bottom of the hand at the wrist area measures
¾”.
F
rom mid hand it measures
1”.
The 4 fingers measures
⅝”
across.
From the top of middle finger to bottom of hand (on left side, diagonally) it measures
1¾” & from top of middle finger to the bottom of the hand it measures 1½”
.
The depth of the hand inside the mold measures ¼”.
All measurements are approximate.
Perfect for Doll making hands - just dust with corn starch or baby powder and push the polymer clay into the mold and prefect hands every time!
No. 15 "What a Character" 1 inch Feet Push Mold by Designer Maureen Carlson - RARE & OOP*
BRAND NEW with original cellophane packaging from Manufacturer
1 inch from heel to toe and
½" from side to side. So detailed - see the feet I molded from my own push mold. I did NOT do any detail work to them, all I did was use a firm clay (I believe it was
Fimo
), dusted my mold with baby powder and after working the clay to soften, I pushed in, matched the clay feet (while still in mold) to the bottom mold and then I removed it. The mold is so DETAILED that there is virtually no trimming, just a light sanding after you bake it and you are ready to Glaze!
So Detailed that you can see the toenails, the arch of the foot and on the bottom, all the toes and the ball of the foot.
Perfect for Doll making, making your sculptures one step easier or just being quirky and making key chains out of them!!
*
No longer being sold or distributed by Manufacturer
Some Molds may NOT have packages, depending on quantities left, however they are NEW and NEVER USED. If this is a problem for you, please let me know as I get new items in regularly and will tell you if new ones with packages are due in. – I ship quickly – so please contact me before or right after you pay for your items
Buying more than 1 kind of push mold? Email me for combined shipping, the more you buy the better the discount!! Email me for details.
Check out my
other molds here
! For more of your crafting needs
visit My eBay Store
!
Be sure to add me to your
favorites list
!
INTERNATIONAL BUYERS - I USE USPS RATES!!! - MUCH CHEAPER THAN EBAY GLOBAL SHIPPING PROGRAM - EMAIL ME and I will be happy to quote you a price!
Thank you for looking.... please come back soon.... NEW ITEMS POSTED WEEKLY!